Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Elegant
Enclosure
EG 2070
Order no.: 32207002
* = Available on request.
Characteristics
Colour of enclosure group
light grey/agate grey
Protection class
IP 40
Enclosure Material
PS (polystyrene); for details see Technical Information
Scope of delivery
Lid, base, screws
Note
Higher protection class on request.
Dimensions
Dimensions
200 x 112 x 70 mm
Product drawing
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product drawing in PDF format: 32207002 EG-2070.pdf (127.2 KB)
Product drawing in DXF format: 32207002 EG-2070.dxf (782.5 KB)
Drawing for mechanical processing: 32207002 EG-2070-G.dxf (3.0 MB)
Product information
Elegant GB.pdf (1.4 MB)