Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Aluplan
Front panels for AP 5..., 3 mm, natural coloured anodised aluminium
AP 01015 FA3
Order no.: 64101015
For AP 51015
* = Available on request.
Characteristics
Colour of enclosure group
--
Enclosure Material
Extruded profiles: Al Mg Si 0.5 powder-coated; corners: diecast zinc ZnAl 4 Cu 1, powder-coated; corner caps: PA-GF 15, corner seal
TPV/TPE; sponge rubber seal (EPDM) in profile groove; for details see Technical Information
Scope of delivery
1 front panel
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product drawing in PDF format: 64101015 AP-01015-FA3.pdf (54.1 KB)
Product drawing in DXF format: 64101015 AP-01015-FA3.dxf (271.5 KB)
Drawing for mechanical processing: 64101015 AP-01015-FA3-G.dxf
(414.3 KB)
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable
glands, ...)
Product information
Aluplan GB.pdf (428.9 KB)