Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Alubos
Front panels, natural-coloured anodised aluminium
ABPU 1040-0150 FP2
Order no.: 84048150
For ABPU 1040-0150, 2 mm
* = Available on request.
Characteristics
Colour of enclosure group
--
Enclosure Material
Extruded profiles: Al Mg Si 0.5 powder-coated; diecast lid: GB Al Si 12, powder-coated; seal: TPE; for details see Technical Information
Scope of delivery
1 front panel
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product drawing in PDF format: 84048150 ABPU-1040-0150-FP2.pdf (31.0
KB)
Product drawing in DXF format: 84048150 ABPU-1040-0150-FP2.dxf
(252.7 KB)
Drawing for mechanical processing: 84048150 ABPU-1040-0150-FP2-
G.dxf (196.4 KB)
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable
glands, ...)
Product information
Alubos GB.pdf (2.7 MB)