Service manual

TRANSMISSION
4. Remove forward gear and dog components until next snap
ring.
Snap ring pressure can cause rings and pliers to eject
suddenly. Use care during removal.
7. Inspect the shaft and gears visually without excessive wear
or crack. Replace any damaged components.
8. Assemble the reverse gear, washer, a new snap ring, and the
sliding gear on the shaft.
9. Assemble the forward gear, washer, bush and a new snap
ring, on the shaft.
5. Remove second snap ring from main shaft.
Counter shaft inspection
1. Inspect the shaft and gears visually without excessive wear
or crack. Replace any damaged components.
6. Remove reverse gear components.
Output shaft removal and inspection
1. Remove the snap ring from output shaft.
5.6