Service manual

TRANSMISSION
3. The sealed drive shaft bearing has a snap ring that
must be removed then drive shaft bearing can be
removed.
4. Assemble the drive shaft, bearing, a new snap ring.
2. Substantial axial movement in the forward drive gear is due
to liberal oil clearance for the bushing, and is a normal
condition. Gear replacement is not required due to axial
movement if radial movement (shown in Step 6) passes
inspection.
Shift fork inspection
1. Inspect the shift fork (B) for scoring or signs of wear. Area
C should not show contact.
3. Radial movement should not exceed 0.05 mm.
Main shaft removal and inspection
1. Inspect sliding gear dogs (E) and dog slots in the mating
gears
(F) for wear or damage. The edges of dogs and slots should be
square and not rounded. Replace both sliding gear and mating
gears if any edges are rounded or chipped.
3. Remove the snap ring from main shaft.
5.5