Service manual

ENGINE
5. Loop the cam chain through the chain room and secure
with mechanic’s wire.
3. Install chain on oil pump and crankshaft sprocket then
place oil pump sprocket into oil pump shaft
OIL PUMP AND CHAIN INSTALLATION
NOTE: Oil pump is not a servicable assembly. Do not
disassemble pump. Replace entire component.
1. Inspect the oil pump sealing surface on the crankcase.
Apply a liberal amount of engine oil to the surfaces and
pump.
2. Install oil pump as shown. Torque screws to specified
torque.
Oil Pump Cover Screw Torque:
8 Nm
5. Install the circlip into oil pump shaft.
6. Install oil pump shield.
NOTE: Do not use gasket sealer on the pump mating
surfaces.
4.30