Service manual

ENGINE
OIL PUMP DRIVE SPROCKET REMOVAL /
INSPECTION
1. Remove the oil pump shield.
2. The outer chain is oil and water pump drive chain.
The inner chain is cam chain.
FLY WHEEL/ ONE-WAY CLUTCH
REMOVAL / INSPECTION
1. Remove the hex bolts that attach the one—way
drive clutch to the flywheel.
2. Inspect the bearing surfaces and drive teeth for
signs of wear or gouging. Replace the one-way clutch
as an assembly if it is not working properly.
NOTE: One--way clutch components are not
serviceable. Replace the component as an assembly.
3. To reattach the one way assembly, apply
Loctitet 272 to the retaining screw threads.
Torque to specification.
One--Way Clutch Screw Torque: 10 Nm
3. Remove pump chain drive sprocket circlip and chain
from pump drive shaft and crankshaft.
4.25