Service manual

MAINTENANCE
5. Clean and reinstall the drain plug. Torque to 19 Nm
(14 ft. lbs.).
Transmission Drain Plug: 19 Nm (14 ft. lbs.)
2. The chain should have 6-12 mm (1/4”-1/2”) deflection. If the
chain needs adjustment, use the following procedure.
Drive Chain Adjustment
1. Loosen the four rear axle hub mount bolts.
6. Add the recommended lubricant. Maintain the lubricant level
at the bottom of the fill plug hole threads.
7. Reinstall the fill plug. Check for leaks.
ATV Gearcase Lubricant (AGL):
900 ml (11.8 oz.)
Drive Chain Inspection
1. Check the amount of chain slack by moving the vehicle
slightly forward to gain deflection at the top of the chain.
3. Turn the chain adjuster clockwise until chain tension is setting
specification.
2.15