Service manual

BODY / SUSPENSION / STEERING
SUSPENSION
Front Shock Removal
1. Elevate front end of the ATV off the ground to remove
shock spring tension.
Severe injury could occur if machine tips or falls.
2. Remove the upper shock mounting bolts from the frame
and the lower shock mounting bolts from the front
suspension arm / A-arm.
3. Replace the shock or spring as required.
4. Install shock as shown above Exploded Figure.
5. Torque shock mounting bolts to specification.
Front Shock Mounting Bolt Torque:
44 Nm (32 ft. lbs.)
7.7