Service manual

BODY / SUSPENSION / STEERING
5. Cut off the straps of rear indicators then disconnects
indicator plugs with main harness.
6.Remove Rear cab from cab.
Front Bumper Removal / Installation
1. Remove the (4) mounting bolts retaining the front bumper
and remove the bumper from the ATV.
Treetrentar 330 Headlight housing Removal
1.The front cab removal procedure same as Goes 300 S except
headlight housing.
2. Remove the 2 upper bolts attaching on front cab.
2. Reverse the previous procedure to reinstall the bumper.
3. Torque mounting bolts to 87 in. lbs. (9.8 Nm).
Front Bumper Mount Bolt Torque
10 Nm (90 in. lbs.)
3. Remove the 2 bottom bolts attaching under front cab.
4. Completely remove the headlight housing from cab
7.5