Service manual

ATX 300 Plus Boost Operation Manual | Version 1 | September 2011 Robert Bosch LLC
4 | Keypad Functions
Keypad Functions
The ATX 300 PLUS BOOST is an automatic transmission fluid exchanger featuring state-of-the-art electronic controls
with digital weight scales measuring the automatic transmission fluid coming into and going out of the machine.
Operation of the ATX 300 PLUS BOOST is intuitive and very easy to master.
Transmission fluid is removed from vehicle and filtered before collecting in the ATX 300 PLUS BOOST
used fluid tank. When the procedure is complete, the ATX 300 PLUS BOOST buzzer will sound
continuously until the stop button is pressed. Refer to page 8 for cooler mode and page 12 for
dipstick mode for complete instructions.
Filters and exchanges the used transmission fluid in the vehicle for new from the ATX 300 PLUS
BOOST. The procedure is complete when the buzzer sounds continuously until the stop button is
pressed. Refer to page 9 for cooler mode and page 12 for dipstick mode for complete instructions.
Transmission fluid is emptied completely from the new fluid tank inside the ATX 300 PLUS BOOST.
It can be stored in a bulk container for later use. This procedure is performed if a change in
transmission fluid types is required. The ATX 300 PLUS BOOST buzzer will sound continuously until
the stop button is pushed when procedure is complete. Refer to page 14 for complete instructions.
Transmission fluid is emptied completely from the used fluid tank inside the ATX 300 PLUS BOOST
into a bulk used tank for proper disposal. This procedure is performed when the used fluid tank is
full or the used fluid tank capacity is not sufficient to perform selected exchange. The ATX 300 PLUS
BOOST buzzer will sound continuously until the stop button is pushed when procedure is complete.
Refer to page 14 for complete instructions.