System information

Introduction 585
8 Press the Right navigation key one or more times to highlight
the Pair button (next to the Pair Device item) and press the
Enter key.
a A dialog box appears, with the prompt Enter PIN#.
b Use the IP Phone dialpad to enter the Bluetooth wireless
technology headset PIN and press the Enter key.
Check your headset documentation to find its PIN (sometimes
called a passkey). Typically this value is 0000.
9 Choose one of the following
•
If the headset is successfully paired with your phone, proceed
to step 10. To verify that the pairing was successful, ensure
that the headset appears in the list next to the Paired: item.
If pairing is successful, the message Pair completed also
appears at the bottom of the screen.
• If the headset is not successfully paired with your phone, an
error message appears at the bottom of the screen. If an
error message appears
— Confirm that the wireless headset is still in search/pair
mode. For example, on the GN Netcom GN 6210 headset
the blue LED should still be lighted when the pairing
operation starts.
— If the headset timed out and exited search/pairing mode,
put the headset in pairing mode, as discussed in step 4,
and repeat step 8.
— Check that you are using the correct PIN and repeat step
8.
10 Choose one of the following
• If your headset is displayed as the first item in the Paired box,
proceed to step 11.
• If more than one device is paired, you may need to navigate
to the one you want, as follows
— Press the Right navigation key one or more times to
highlight the item in the Paired box. Press the Enter key
to start the edit mode.
— Press the Up/Down navigation keys to open the list.
Press the Up/Down navigations key to scroll in the list
and highlight your headset.
— Press the Enter key to select the headset and close the
list. Press the Enter key to exit edit mode.
11 Choose one of the following
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.