System information

Introduction 583
2 Press 3 on the dialpad to access the Network Configuration
menu or use the Up/Down navigation keys to scroll and highlight
the Network Configuration option.
3 Use the Right navigation key to navigate to the Enable
Bluetooth box. The current setting is displayed.
4 Press Enter to start the edit mode.
5 Use the Down navigation key to open the list.
6 Use the Up/Down navigation keys to scroll and highlight the
desired Bluetooth wireless technology mode.
7 Press Enter to select the mode and to close the list.
8 Press Enter to exit the edit mode.
9 Press the Apply&Reset soft key to save the change and to
restart the phone.
--End--
The new mode takes affect when the IP Phone restarts. If the
administrative control enabled Bluetooth wireless technology on the phone,
the item 4. Bluetooth Setup appears in 1. Preferences submenu.
After setting administrative control, it is recommended that the Partial
Menu Lock feature be activated to prevent users from changing the
administration setting. For further information about the Partial Menu Lock
feature, see “Local Tools menu” (page 521).
Pairing your headset
Use Procedure 154 “Pairing the Bluetooth wireless technology headset
with your IP Phone” (page 583) to pair the Bluetooth wireless technology
headset with your IP Phone.
Procedure 154
Pairing the Bluetooth wireless technology headset with your IP Phone
Step Action
1 Restart your IP Phone using one of the following methods
• If you are using an AC power adapter, unplug it, wait 10
seconds, and reinsert it.
• If you are using POE, unplug the LAN Ethernet cable, wait 10
seconds, and reinsert it.
2 Double-press the Headset key to open the 4. Bluetooth Setup
dialog box.
The Enable Bluetooth check box is highlighted.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.