System information

582 Headset support
Enabling Bluetooth wireless technology
The following methods are available to enable Bluetooth wireless
technology on the IP Phone
• Manual configuration— is used to set the Bluetooth wireless
technology mode on the IP Phone on a phone-by-phone basis. If
manual configuration is used exclusively, a TFTP server is not required
to configure Bluetooth wireless technology. For further information
about manual configuration, see “Manual configuration” (page 582).
Use Procedure 153 “Configure the Bluetooth wireless technology
administration setting” (page 582) to configure the Bluetooth wireless
technology through the Local Tools > Network Configuration
submenu.
•
Automatic provisioning configuration—you can use the "bt" parameter
to centrally configure Bluetooth wireless technology on the IP Phone.
For more information, see “Provisioning the IP Phones” (page 447).
If you enable Bluetooth wireless technology and password protection for
the Local Tools menu on your IP Phone you can double-press the Headset
key to access the Bluetooth Setup menu.
Manual configuration
You can enable or disable Bluetooth wireless technology through the
Network Configuration menu. The Enable Bluetooth option provides
administration control over Bluetooth wireless technology. The following
values are available
•
Auto—(default) Bluetooth wireless technology setting received through
TFTP configuration
• Yes—Bluetooth wireless technology is enabled on the IP Phone
•
No—Bluetooth wireless technology is disabled on the IP Phone
When the IP Phone firmware is upgraded or when the IP Phone is
received from the manufacturer with the latest firmware, the default power
up setting is Auto. When the setting is Auto, the setting received from the
TFTP Device Config file controls whether Bluetooth wireless technology
is enabled.
When the Bluetooth wireless technology setting is Yes or No, the value
received from the automatic provisioning is not used.
Procedure 153
Configure the Bluetooth wireless technology administration setting
Step Action
1 Double-press the Services key.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.