System information

Graphic-based diagnostics utilities 569
Procedure 148
Using the IP Set and DHCP Information tool
Step Action
1 Press the Services key twice.
2 Press 2 1 on the dialpad to access the IP Set&DHCP
Information menu or use the Up/Down navigation keys to scroll
and highlight the IP Set & DHCP Information option.
3 Press the Select soft key.
You can press the Return soft key to exit the menu and return to
Local Diagnostics submenu.
The tool displays the following information
•
Configuration
— Network data validated, MAC address stored, DHCP
setting
— Voice VLAN status, type of configuration and discovery
status
— Primary Server identification, PC Port enabled status
• Firmware version and Hardware Identification number
•
Telephone Set IP address
•
Network subnet mask
•
Gateway IP address
• EPROM Server S1 and S2 IP addresses, ports, actions, and
number of retries
• Voice VLAN priority and VLAN ID
• DHCP Response String
•
Server information for S01, S02, S03, and S04, including
IP addresses, ports, actions, number of retries, and failover
values
• TFTP Server IP address
Figure 108 "IP Set and Information screen" (page 570) shows IP
Set & DHCP Information screen.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.