System information

Graphic-based diagnostics utilities 567
• Gateway IP address
•
EPROM Server S1 and S2 IP addresses, ports, actions, and
number of retries
•
Voice VLAN priority and VLAN ID
•
DHCP Respond String
•
Server Information for S01, S02, S03, and S04, including
IP addresses, ports, actions, number of retries, and failover
values
4 Use the scroll bar to display all the information.
5 Tap the Exit soft key to return to the Local Diagnostics menu.
--End--
The USB Devices tool provides information about Universal Serial Bus
(USB) devices that connect to your IP Phone. The IP Phone automatically
detects USB devices when they are connected to the USB port in the back
of the IP Phone. The IP Phone enumerates and lists any USB device,
such as USB mice, USB keyboards, and USB wireless headsets. The
display shows the descriptive text string received from the USB device.
ATTENTION
The IP Phone USB Port available power is limited to 100mA. If USB devices
connected to this port require more than 100mA an externally powered USB
hub is required.
Procedure 147
Using the USB Devices tool
Step Action
1 Tap the Tools icon.
2 Tap the Local Diagnostics soft key.
3 Tap the USB Devices soft key.
4 Tap the Exit soft key to return to the Local Diagnostics menu.
--End--
The Advanced Diag Tools are available to the Nortel support organization
to configure the auto recovery function and remote access.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.