System information

Text-based diagnostic utilities 537

2 Use the Navigation keys to browse the data. See Figure 97 "IP

Networking Statistics data display screen" (page 549).

3 Press one of the following soft keys

• Reset — to clear the data and reset the statistic counter

•

Exit — to return to the Network Diagnostic Tools menu

--End--

Procedure 124

Accessing IP Set and DHCP Information

Step Action

1 Select IP Set & DHCP Information from the Network

Diagnostic Tools menu. The IP Set and DHCP information

appears on the display.

2 Use the Navigation keys to browse the data. See Figure 98

"DHCP information data display page" (page 550).

In Local Mode, Exit is the only soft-key available in this

submenu.

--End--

Remote Mode

When the IP Phone is registered to the signaling server, diagnostics are

available through the Telephone Options menu in Remote Mode. This

menu is controlled by the TPS.

Diagnostics are available on the IP Audio Conference Phone 2033 in

Remote Mode only.

When the user selects Diagnostics from the Telephone Options menu,

if an IP Phone Installer Password is enabled in the Signaling Server, the

Diagnostics menu is locked and the message "Access denied" displays

on the IP Phone display.

Use Procedure 125 “Accessing the Diagnostics submenu in Remote

Mode” (page 538) to access the Diagnostics submenu in Remote Mode:

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009