System information

Redeploying an IP Phone 2002 53

The IP Phone 2002 supports both AC power and Power over

LAN options, including IEEE 802.3af Power Classification 2.

To use Power over Ethernet, where power is delivered over

the CAT5e cable, the LAN must support Power over Ethernet,

and an AC adapter is not required. To use local AC power, the

optional AC adapter can be ordered separately.

--End--

When you complete the IP Phone connection, you must connect the phone

to the network. See “Dynamic Host Configuration Protocol” (page 405).

Startup sequence

When an IP Phone 2002 connects to the network, it must perform a startup

sequence. The elements of the startup sequence include:

•

obtaining network access (if supported by the network infrastructure)

•

obtaining VLAN ID (if supported by the network infrastructure)

•

obtaining the IP parameters

•

connecting to the Call Server

• obtaining provisioning parameters

For information about provisioning the IP Phone, see “Manual provisioning

of IP Phone 2000 Series” (page 495).

Redeploying an IP Phone 2002

You can redeploy an existing previously configured IP Phone 2002 on the

same Call Server. For example, the IP Phone 2002 can be assigned to

a new user (new TN) or to an existing user who moved to a new subnet

by changing the TN of the IP Phone 2002. For further information, see

Converging the Data Network with VoIP Fundamentals (NN43001-260).

Procedure 8

Changing the TN of an existing IP Phone 2002

Step Action

1 Repower the IP Phone 2002.

During the reboot sequence of a previously configured IP

Phone, the IP Phone 2002 displays the existing node number

for approximately 5 seconds.

2 If the node password is enabled and NULL, choose one of the

following:

a Disable the password.

b Set the password as non-NULL.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009