System information

526 Local Tools menu
Nortel recommends you use the Telephone Options menu to adjust the
contrast.
2. Languages
Use this item to select the language of the IP Phone.
Note:
Hebrew can only be configured on the Call Server.
3. Headsets
Use this item to select an active headset, to set the headset operational
mode, and to control settings for the Nortel Mobile Headset Adapter.
4. Bluetooth Setup 4. Bluetooth Setup
You can access the Bluetooth Setup options using either of the following
two methods
• Double press the Headset key to open the 3. Bluetooth Setup dialog
box.
• Double press the Services key to open the Local Tools menu, press 1
on the dialpad to select 1. Preferences and press 3 on the dialpad to
open the 3. Bluetooth Setup dialog box.
The 4. Bluetooth Setup item is not available on all phones. If the
Bluetooth Setup menu item appears dimmed, or fails to open when
you double press the Headset key, Bluetooth wireless technology is
not enabled on your phone. To configure the administration setting for
Bluetooth wireless technology, see “Headset support” (page 581).
Local Diagnostics
For information about Local Diagnostics, see “IP Phone diagnostic utilities”
(page 531).
Network Configuration
Use the Network Configuration menu item to configure the IP Phone
1120E IP Phone 1140E, and the IP Phone 1150E, and to display
information, which was configured during installation. You can access the
Network Configuration menu using one of the following methods
• Reboot the IP Phone and press the four soft keys at the bottom of the
display in sequence from left to right.
• Select 3. Network Configuration from the Local Tools menu.
For more information, see “Provisioning the IP Phones” (page 447) and
“Manual provisioning of IP Phone 2007 and 1100 Series” (page 487).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.