System information

Provision parameters 489
Description Describe the option.
Dependency Show any dependency that controls when that option is enabled or
can be used.
If the prompt has a dependency, the dependency appears on the
same line as the prompt, and input options start on the next line of
the table.
If an option has a dependency, the dependency appears on same
line as the option and applies only to that option.
If both the prompt and the option have dependencies, they are
cumulative between the prompt and the option and
and is used to
show multiple dependencies.
Table 126 "Provisioning parameters for graphic-based IP Phones" (page
489) lists the provisioning parameters for the IP Phone 1120E, IP Phone
1140E, IP Phone 1150E, and IP Phone 2007.
The parameters appear in order of appearance.
Table 126
Provisioning parameters for graphic-based IP Phones
Config menu
option
Options or input
Description Dependency
EAP mode Disable EAP disabled
MD5 MD5 encryption
PEAP PEAP encryption
TLS TLS encryption
ID 1 4 to 8 characters EAP ID EAP mode = MD5
ID 2 4 to 8 characters EAP ID EAP mode = MD5 of TLS
Password 4 to 12 characters EAP password EAP mode = MD5, PEAP, or
TLS
Enable
802.1ab
(LLDP)
Checked Enable LLDP
Unchecked LLDP not used
DHCP Yes DHCP used
No Static IP and config
used
Set IP IP address IP Phone IP
address
DCHP = No
Net mask Subnet mask IP Phone subnet
mask
DHCP = No
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.