System information

476 Provisioning the IP Phones
Table 120
Factory default values
Parameter Factory default value
Enable 802.1x (EAP) Disabled
802.1x Device ID None
802.1x Password None
Enable 802.1ab (LLDP) Yes
ATTENTION
The new firmware versions (U3.2 and newer) set
this option to No because LLDP enabled by default
was causing interoperability issues with some
switches.
DHCP mode On
Set IP
0.0.0.0
Net Mask
0.0.0.0
Gateway
0.0.0.0
S1 IP
0.0.0.0
S1 Port
0
S1 Action
1
S1 Retry
255
S1 PK 0xffffffffffffffff
S2 IP
0.0.0.0
S2 Port
0
S2 Action
1
S2 Retry
255
S2 PK 0xffffffffffffffff
Network Speed Auto
Network Duplex Mode Auto
Voice 802.1Q Enabled
Voice VLAN Mode DHCP Auto
Voice VLAN ID
4095
Voice Control pBit 8 (Auto)
Voice Media pBit 8 (Auto)
VLAN Filter Disabled
Enable PC Port Yes
PC Port Speed Auto
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.