System information

Automatic provisioning 467
Parameter Value Description
vmp
Value from 0 to 8
8 = Auto
802.1Q media p bit for voice
stream802.1Q control p bit for
voice stream.
If value is configured to 8 then
the p bit value is received
through LLDP or TPS.
If value is not configured the
IP Phone defaults to 6.
vlanf y for yes
n for no
Enable VLAN filter on voice
stream.
PC Port
pc
y for yes
n for no
Enable PC port.
This parameter does not
apply to the IP Phone 2001.
pcs
a for automatic negotiation
10 for 10 Mbps
100 for 100 Mbps
PC port speed.
pcd a for automatic negotiation
f for full duplex
h for half duplex
PC port duplex.
Data VLAN
dq y for yes
n for no
Enable 802.1Q for PC port.
dv y for yes
n for no
Enable VLAN for data.
This parameter does not
apply to the IP Phone 2001.
dvid Value from 0 to 4095 VLAN ID for data VLAN.
dp Value from 0 to 15 802.1Q p bit for data stream.
Diffserv Codepoint
ediff Value from 0 to 255 DiffServ code point for
controlled packets.
mdiff Value from 0 to 255 DiffServ code point for media
packets.
pcuntag
y for yes
n for no
Enable tag stripping on
packets forwarded to PC port.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.