System information

466 Provisioning the IP Phones
Parameter Value Description
pk1 Character string of 16 characters,
which represents 16 hexadecimal
digits
S1 PK.
s2ip Value from 0.0.0.0 to 255.255.255.
255
Secondary server IP address.
p2
Value from 0 to 65535 Secondary server port
number.
a2
Value from 0 to 255 Secondary server action
code.
r2
Value from 0 to 255 Secondary server retry count.
pk2 Character string of 16 characters,
which represents 16 hexadecimal
digits
S2 PK.
Other networking
lldp y for yes
n for no
Enable 802.1ab LLDP.
stickiness y for yes
n for no
Enable stickiness.
cachedip y for yes
n for no
Enable cached IP.
igarp y for yes
’n’ no
Enable GARP.
srtp
y for yes
n for no
Enable SRTP-PSK.
Voice VLAN
vq
y for yes
n for no
Enable 802.1Q for voice.
vcp
Value from 0 to 8
8 = Auto
802.1Q control p bit for voice
stream.
If value is configured to 8 then
the p bit value is received
through LLDP or TPS.
If value is not configured the
IP Phone defaults to 6.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.