System information

Automatic provisioning 463
Config
option
Options or
input
Description Automatic Manual
TN LLL-SS-CC-UU
or
LLL SS CC UU
Terminal Number of phone on
system.
Yes Yes
CC-UU
or
CC UU
You can reset the IP Phone parameters to the factory default. For more
information, see “Factory default” (page 475).
Automatic provisioning using 802.1ab switch (LLDP)
You can use LLDP to provision a limited number of parameters, such as
Voice VLAN, Data VLAN, Layer 2 priority bits, and DiffServ.
Automatic provisioning using DHCP
You can use DHCP to provision all parameters in the info block. For more
information, see Table 113 "Provisioning info block format" (page 465).
The text below shows an example of the DCHP Nortel i2004-B option
string using the provisioning info block.
Nortel-i2004-B,s1ip=47.11.62.20;p1=4100;a1=1;r1=255;s2ip=47
.11.62.21;p2=4100;a2=1;r2=2;xip=47.11.62.147;xp=44443;xa=g;
menulock=p;lldp=y;pk1=438A64FC24127C23;pk2=64FC23CD24AB1413;
igarp=y;srtp=y;zone=4thfloor;file=ztd;
Automatic provisioning using TFTP You can use TFTP to provision all
parameters in the info block. For a list of these parameters, see Table 113
"Provisioning info block format" (page 465).
ATTENTION
The IP Phone attempts to locate firmware updates and font resources files using
the <type>.cfg file. For more information, see “TFTP Server” (page 593).
ATTENTION
Automatic provisioning using TFTP still requires a DHCP server to push down
IP Phone IP addresses and the DHCP option Nortel i2004-B and the prov=
argument of the provisioning info block for the location of the TFTP server.
The text below shows an example of the configuration file using the
provisioning info block.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.