System information

458 Provisioning the IP Phones
For manual configuration steps, see “Manual provisioning of IP Phone
1110 and 1200 Series” (page 479).
If you configure parameters for automatic provisioning in the Auto
Provision page, the parameter appears dimmed in the Configuration page.
Automatic configuration
Provisioning information is stored on a managed central server. The IP
Phones can automatically obtain parameter values.
ATTENTION
The IP Phone receives provisioning information from a DHCP or TFTP server.
Some parameters require the IP Phone to reset in order for an updated value
to take effect.
Table 111 "Automatic provisioning parameters legend" (page
458) provides a legend for Table 112 "Provisioning parameters " (page
458).
Table 111
Automatic provisioning parameters legend
Configuration menu option List each configuration parameter.
Options or input List every choice available for the parameter and the minimum and
maximum number of characters or digits allowed.
Description Describe the option.
Manual List parameters that you can manually provision.
Automatic List parameters that you can automatically provision.
Only DHCP and TFTP provide the automatic provisioning datablock.
The parameters list in order of appearance.
Table 112
Provisioning parameters
Config
option
Options or
input
Description Automatic Manual
EAP mode Disable EAP disabled Yes Yes
MD5 MD5 encryption
PEAP PEAP encryption
TLS TLS encryption
ID 1 4 to 8 character
s
EAP ID Yes Yes
ID 2 4 to 8 character
s
EAP ID Yes Yes
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.