System information

Automatic provisioning 457
• Press the AllAut content-sensitive soft key on the Auto
Provisioning page to automatically configure all parameters.
•
Use the dial pad to enter the number associated with the
parameter, or use the navigation keys to scroll and highlight
the specific parameter. Then press Auto to configure specific
parameters, which were previously configured automatically.
ATTENTION
If you configure a group item for automatic provisioning, all items of
the group configured for automatic provisioning.
3 Press Enter to save the settings or press Cancel to exit the
Network Configuration without saving changes.
--End--
Procedure 111
Configuring parameters manually for text user interface
Step Action
1 Press Auto on the Configuration page to switch to the Auto
Provisioning page.
2 Perform one of the following actions:
•
Press the AllMan content-sensitive soft key on the Auto
Provisioning page to manually configure all parameters.
•
Use the dial pad to enter the number associated with the
parameter, or use the navigation keys to scroll and highlight
the specific parameter. Then press Man to configure specific
parameters, which were previously configured automatically.
ATTENTION
If you configure a group item for automatic provisioning, all items of
the group configured for automatic provisioning.
3 Press Enter to save the settings or press Cancel to exit the
Network Configuration without saving changes.
--End--
Configuration page for text user interface
Press Cfg on the Auto Provisioning page to access the Configuration
page.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.