System information

454 Provisioning the IP Phones

Procedure 109

Conﬁguring parameters manually for GUI

Step Action

1 Press Auto on the Configuration page to switch to the Auto

Provisioning page.

2 Perform one of the following actions:

• Press the All-Ma content-sensitive soft key on the Auto

Provisioning page to manually provision all parameters.

•

Use the dial pad to enter the number associated with the

parameter, or use the navigation keys to scroll and highlight

the specific parameter. Then press Manual to configure

specific parameters, which were previously configured

automatically.

ATTENTION

If you configure any item of a group for automatic provisioning, all

items of the group configured for automatic provisioning.

3 Press Apply to save the settings or press Cancel to exit the

Network Configuration without saving changes.

--End--

Configuration page for graphical user interface

Press Config on the Auto Provisioning page to access the Configuration

page.

For manual configuration steps, see “Manual provisioning of IP Phone

2007 and 1100 Series” (page 487).

If you configure parameters for automatic provisioning in the Auto

Provision page, the parameter appears dimmed in the Configuration page.

Auto Provisioning page for text user interface

Table 110 "Auto Provisioning page" (page 455) shows the Auto

Provisioning page for a text user interface.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009