System information

Automatic provisioning 453
14.
Auto Recover Flag [ ]
SSH User ID [ ]
SSH Password [ ]
15.
Screen Contrast [ ]
Screen Brightness [ ]
Screen Backlight [ ]
Display Dim Enable [ ] (IP Phone 2007)
16.
Headset Type [ ]
Bluetooth Enable [ ] (IP Phone 1140E and IP Phone 1150E)
17.
Bold [ ]
Perform the following procedures to configure all parameters or specific
parameters to automatic provisioning or manual provisioning for the GUI.
Procedure 108
Configuring parameters automatically for GUI
Step Action
1 Press Auto on the Configuration page to switch to the Auto
Provisioning page.
2 Perform one of the following actions:
• Press the All-Auto content-sensitive soft key on the Auto
Provisioning page to automatically provision all parameters.
•
Use the dial pad to enter the number associated with the
parameter, or use the navigation keys to scroll and highlight
the specific parameter. Then press Auto to configure specific
parameters, which were previously configured automatically.
ATTENTION
If you configure any group item for automatic provisioning, all items of
the group configured for automatic provisioning.
3 Press Apply to save the settings or press Cancel to exit the
Network Configuration without saving changes.
--End--
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.