System information

450 Provisioning the IP Phones
Configuration
You can store common provisioning parameters in a managed central
server, such as a DHCP or a TFTP server, or both. You can configure the
IP Phone to automatically or manually obtain the provisioning parameters
from the various provisioning sources.
For automatic provisioning, the IP Phone receives the parameters from
the provisioning server. You can switch between automatic provisioning to
manual provisioning on the Auto Provisioning page. You enter parameter
information on the Configuration page.
Provisioning IP Phone parameters
By default, the IP Phone can automatically provision most parameters.
However, you can manually provision parameters. The Auto Provisioning
page provides the selection to manually override the parameter. Use the
Network Configuration menu item to configure IP Phone parameters.
Double-press the Services key to open the Local Tools menu and press 3
on the dial pad to open the Network Configuration menu.
The automatic provisioning menu supports both the graphical user
interface (GUI) and text-based user interface.
The following IP Phones support a GUI:
• IP Phone 2007
•
IP Phone 1120E
•
IP Phone 1140E
•
IP Phone 1150E
The Configuration page appears when you select the Network
Configuration menu item. Any automatic provisioned parameters appear
dimmed.
For more information about the Auto Provisioning page for GUI, see
“Auto Provisioning page for graphical user interface” (page 451) . For
information about the Configuration page for GUI, see “Configuration page
for graphical user interface” (page 454) .
The following IP Phones support a text-based user interface:
• IP Phone 1110
• IP Phone 1210
• IP Phone 1220
• IP Phone 1230
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.