System information

ManualsBrandsBoots ManualsGadgetsCS-1000

421

422

423

424

425

426

427

428

429

430

Network features 427

"aaa" and "rrr" are ASCII encoded decimal numbers with a range of 0 to

255. They identify the "Action Code" and "Retry Count", respectively, for

the associated TPS server. Internally to IP Phone 2004 they are stored

as 1 octet (0x00 to 0xFF). Note that these fields must be no more than

3 digits long.

The string enables the configuration of information for two Connect

Servers. One Connect Server exists for each IP node. In the typical

system configuration of a single IP node, only the primary Connect Server

is required. In this case, the primary Connect Server string must be ended

with a period (.) instead of a semi-colon (;). For example,

Nortel-i2004-A,iii.jjj.kkk.lll:ppppp,aaa,rrr.

If the secondary Connect Server portion of the string is specified, then

the string information is typically the same as the primary Connect Server

information. For example:

Nortel-i2004-A,iii.jjj.kkk.lll:ppppp,aaa,rrr;iii.jjj.kkk.ll

l:ppppp,aaa,rrr.

When the Enhanced Redundancy for IP Line Nodes feature is used,

two different Connect Server strings can be configured, separated with

a semi-colon (;). This enables the telephone to register to two different

nodes. For more information about the Enhanced Redundancy for IP Line

Nodes feature, see

Signaling Server IP Line Applications Fundamentals

(NN43001-125).

Action code values (0 to 255):

1 — UNIStim Hello (currently only this type is a valid choice)

all other values (0, 2 to 255) — reserved

iii,jjj,kkk,lll are ASCII-encoded, decimal numbers representing the IP

address of the server. They do not need to be 3 digits long as the "." and

":" delimiters guarantee parsing. For example, ’001’, ’01’, and ’1’ would all

be parsed correctly and interpreted as value 0x01 internal to the IP Phone

2004. Note that these fields must be no more than three digits long each.

ppppp is the port number in ASCII encoded decimal. The port number

must be set to 4100.

In all cases, the ASCII encoded numbers are treated as decimal values

and all leading zeros are ignored. More specifically, a leading zero does

not change the interpretation of the value to be OCTAL encoded. For

example, 0021, 021, and 21 are all parsed and interpreted as decimal 21.

Format for IP Phone DHCP Site Specific Option

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009