System information

42 Nortel IP Phone 2002

After you install and configure an IP Phone, if power to the phone is

interrupted, you need not re-enter the IP parameters, node number,

Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2002 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 2002

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 2002 network and CS 1000

connections.

Figure 4 "IP Phone 2002" (page 42) shows the IP Phone 2002.

Figure 4

IP Phone 2002

Components and functions

This section describes the following components and functions of the IP

Phone 2002:

• “Keys and functions” (page 43)

• “Services menu” (page 44)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009