System information

386 Features

• Auto-Negotiate Capability: N

•

Auto-Negotiate Completed: N

--End--

Use the following procedure to enable Full Duplex mode on the IP Phone

1110, IP Phone 1120E, IP Phone 1140E, and IP Phone 1150E.

Procedure 105

Enabling Full Duplex mode for 1100 Series IP Phones

Step Action

1 Double-press the Services key to open the Local Tools menu.

2 Press 3 on the dialpad to access the Network Configuration

menu or use the Up/Down navigation keys to scroll and highlight

the Network Configuration option.

3 Use the Right navigation key to scroll and highlight the Duplex

list.

4 Press Enter to start the edit mode.

5 Press the Down navigation key to open list box.

6 Use the Up/Down navigation keys to scroll and highlight one of

the following options

• 10BT Full—10 BT Full Duplex mode

• 100BT Full—100 BT Full Duplex mode

7 Press Enter to exit the edit mode.

8 Press the Apply&Reset soft key to save the changes and to

restart the IP Phone. The firmware settings are read and are

applied to UPLINK and the PC Ethernet Port.

--End--

When the IP Phone 1120E restarts, the firmware reads the setting for Full

Duplex mode and sets both port 0, network interface port, and port 1, PC

interface port, accordingly.

Use Procedure 106 “Checking Ethernet Statistics for IP Phone 1110

Series” (page 387) to confirm activation of Full Duplex mode.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009