System information

ManualsBrandsBoots ManualsGadgetsCS-1000

381

382

383

384

385

386

387

388

389

390

Network features 385

Procedure 103

Enabling Full Duplex mode for IP Phone 2007

Step Action

1 Tap the Tools icon.

2 Enter the Tools menu password (if Password protection is

enabled). For information about Password Protection, see “Local

Tools menu” (page 521).

3 Tap the Network Configuration menu entry.

4 Use the Right navigation key to scroll and highlight the Duplex

list.

5 Press the Down navigation key to open list box.

6 Use the Up/Down navigation keys to scroll and highlight one of

the following options:

• 10BT Full—10 BT Full Duplex mode

•

100BT Full—100 BT Full Duplex mode

7 Tap the Apply&Reset soft key to save the changes and to

restart the IP Phone. The firmware settings are read and are

applied to UPLINK and the PC Ethernet Port.

--End--

When the IP Phone restarts, the firmware reads the setting for Full Duplex

mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and

speed accordingly.

Use the following procedure to confirm activation of Full Duplex mode.

Procedure 104

Checking Ethernet Statistics for IP Phone 2007

Step Action

1 Tap the Tools icon.

2 Tap the Local Diagnostics soft key.

3 Tap the Ethernet Statistics soft key.

The following statistics are displayed:

• Link: Up

• Duplex: Full

• Speed: 10 (Mb) or 100 (Mb)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009