System information

376 Features
1230—Procedure 98 “Enabling SRTP media encryption on a Phase II
IP Phone, IP Phone 1110 or IP Phone 1200 Series” (page 376)
•
IP Phone 2007—Procedure 99 “Enabling SRTP media encryption on
an IP Phone 2007” (page 376)
• IP Phone 1120E, IP Phone 1140E, and IP Phone 1150E—Procedure
100 “Enabling SRTP media encryption on an IP Phone 1120E, IP
Phone 1140E, or IP Phone 1150E” (page 377)
For more information about configuring an IP Phone, see the applicable
section in this document.
Procedure 98
Enabling SRTP media encr yption on a Phase II IP Phone, IP Phone 1110 or
IP Phone 1200 Series
Step Action
1 Disconnect then reconnect the power on the IP Phone to reset it.
2 When the Nortel logo appears, press each of the four soft keys
at the bottom of the display in sequence from left to right, one at
a time.
3 If no other configuration changes are required, press OK
repeatedly until PSK SRTP (0-No, 1-Yes) option appears.
4 Press 1 to enable PSK SRTP.
5 Press OK.
6 Restart the IP Phone.
--End--
For more information about configuring an IP Phone, see “Provisioning
the IP Phones” (page 447).
Procedure 99
Enabling SRTP media encr yption on an IP Phone 2007
Step Action
1 Tap the Tools icon.
2 Select Network Configuration.
3 Use the Right navigation key to scroll to Enable PSK SRTP. The
current setting displays.
4 Select the check box to enable SRTP media encryption.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.