System information

Telephony features 371
Password Administration
Once the Station Control password (SCPW) has been set by the system
administrator on the Call Server, end users can operate this feature from
IP Phones to protect private directory information stored on the Application
Server. For more information about using Password Administration from
IP Phones, see the appropriate user guide. For information about the
Password Administration feature, see
Signaling Server IP Line Applications
Fundamentals (NN43001-125).
IP Call Recording
IP Call Recording enables an IP Call Recording Server to monitor the
media stream for the active call and record it by that provide the IP
address and port information for an IP Phone on an active call. The
following recording models are supported
•
bulk call recording — records all calls on an IP Phone
• quality monitor recording — records individual calls on an IP Phone
If the network connection between the IP Call Recording Server and the IP
Phone is lost, active calls cannot be recorded.
For more information about the IP Call Recording feature, see Signaling
Server IP Line Applications Fundamentals (NN43001-125) and Automatic
Call Distribution Fundamentals (NN43001-551).
Virtual Office
The Virtual Office feature enables end users to log into any IP Phone using
their own user ID and password This redirects the telephone calls and
other features to the Virtual Office logged-in IP Phone. For information
about using Virtual Office on an IP Phone, see the appropriate user guide.
For more information about the Virtual Office feature, see Signaling Server
IP Line Applications Fundamentals (NN43001-125) and Features and
Services Fundamentals (NN43001-106).
Emergency Services for Virtual Office
The E911 for Virtual Office feature allows Virtual Office users to place
an emergency call to the correct Public Safety Answering Point (PSAP)
for their geographic location. For more information about the E911 for
Virtual Office feature, see Emergency Service Access Fundamentals
(NN43001-613).
Active Call Failover
The Active Call Failover (ACF) feature enables an IP Phone to reregister in
the ACF mode during a Signaling Server failure.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.