System information

362 Expansion Module for IP Phone 1100 Series

Figure 68

Adjusting the stand angle on the IP Phone

2 At the back of the IP Phone, remove the rubber plug from the

Accessory Expansion Module (AEM) port. Place the connecting

arm of the Expansion Module behind the IP Phone and align the

Expansion Module connection plug to the AEM port on the back

of the IP Phone.

3 Insert the screws in to the top and bottom holes of the

connecting arm of the Expansion Module and tighten until snug.

See Figure 69 "Connecting the Expansion Module" (page 363).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009