System information

348 Nortel IP Phone 1150E

REQ: new

TYPE: 1150

For more information about configuring the IP Phone 1150E usi

ng LD 11, see Software Input Output Reference-Administration

(NN43001-611).

3 Configure the IP Phone 1150E in Element Manager. IP Phones

are configured using the Phones section in the Element

Manager navigation tree. For more information about configuring

the IP Phone 1150E using Element Manager, see Element

Manager System Reference - Administration (NN43001-632).

--End--

Connecting the components

Use Procedure 93 “Connecting the components” (page 348) to connect

the components for the IP Phone.

CAUTION

The IP Phone 1150E is shipped with the stand locked in

position. To avoid damaging the IP Phone, press the wall-mount

lever located under the base to release the stand and pull it

away from the phone.

Procedure 93

Connecting the components

Step Action

1 Press the wall-mount lever located under the base to release the

stand and pull it away from the phone. See Figure 62 "Release

the IP Phone 1150E from the stand" (page 349).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009