System information

Removing an IP Phone 1140E from service 331

3 Follow to install the IP Phone 1140E. To configure the IP Phone,

see “Manual provisioning of IP Phone 2007 and 1100 Series”

(page 487).

4 Enter the same TN and Node Number as the IP Phone 1140E

you replaced. The Call Server associates the new IP Phone

1140E with the existing TN.

--End--

Removing an IP Phone 1140E from service

Procedure 91

Removing an IP Phone 1140E from service

Step Action

1 Disconnect the IP Phone 1140E from the network or turn the

power off.

The service to the PC is disconnected as well if the PC connects

to the IP Phone 1140E.

If the IP Phone 1140E was automatically configured, the DHCP

lease expires and the IP address returns to the available pool.

2 In LD 11, enter the following:

REQ: OUT

TYPE: 1140

TN: LLL S CC UU

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009