System information

Installation and configuration 325

Figure 55

Release the IP Phone 1140E from the stand

2 Remove the stand cover. Pull upward on the center catch and

remove the stand cover. The cable routing tracks are now

accessible. See Figure 56 "Stand cover removed" (page 325).

Figure 56

Stand cover removed

3 Connect the AC power adapter (optional). Leave the AC adapter

unplugged from the power outlet, connect the adapter to the AC

adapter jack in the bottom of the phone. Form a small bend in

the cable, and then thread the adapter cord through the channels

in the stand.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009