System information

32 Nortel IP Phone 2001

Soft key label display

The soft key label has a maximum six characters. Each soft key includes

the soft key label and an icon. When a soft key is in use, a triangle icon

appears at the beginning of the soft key label, and the label shifts one

character to the right. (If the label is six characters in length, the last or

rightmost character is truncated.) If a feature is enabled, the icon state

turns to On. The icon remains in the on state until the feature key is

pressed again. This cancels the enabled feature and turns the icon off,

and returns the soft key label to its original state.

Use the More soft key to navigate the layers of functions. If only four

functions are assigned to the soft keys, the More key does not appear,

and all four functions are displayed.

Package components

The following information applies to Phase II IP Phones. Product codes for

Phase II IP Phones are different from previous IP Phones.

See the product code on the back of the phone to confirm whether it is a

Phase II IP Phone. The product code for Phase II IP Phones appears as

IP Phone 200x. The product code for previous versions of the IP Phones

appears with an i in front of the model number (for example, i200x).

You must order the AC power adapter separately if local power using the

AC adapter is required, because Phase II IP Phones include integrated

support for a number of power over LAN options, including support for

IEEE 802.3af standard power.

Table 3 "Package components" (page 32) lists the IP Phone 2001 package

components.

Table 3

Package components

• IP Phone 2001

•

handset

• handset cord

• 2.1 m (7-ft) e Ethernet cable

• Getting Started Card

Table 4 "IP Phone 2001 components list" (page 33) lists the IP Phone

2001 components and product codes.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009