System information

Components and functions 315
Components and functions
This section describes the following components of the IP Phone 1140E
•
“Keys and functions” (page 315)
•
“Services menu” (page 317)
• “Local Tools menu” (page 318)
Keys and functions
Table 68 "IP Phone 1140E keys and functions" (page 315) lists keys and
functions for the IP Phone 1140E.
Table 68
IP Phone 1140E keys and functions
Key Function
Hold Press the Hold key to put an active call on hold. Press the line (DN)
key beside the flashing LCD to return to the caller on hold.
Goodbye Press the Goodbye key to terminate an active call.
Visual Alerter/Message
waiting indicator
When a message is waiting, the red Visual Alerter/Message waiting
indicator lights. Also, when the ringer sounds, this indicator flashes.
Feature Status Lamp
indicator
When the firmware is updating, the blue Feature Status Lamp
indicator flashes.
This function requires server support and, therefore, is not available
on all phones.
Self-labeled line/programma
ble feature keys labels
Self-labeled line/programmable key labels are configured for various
features on the IP Phones.
A steady LCD light beside a line (DN) key indicates the feature or
line is active. A flashing LCD indicates the line is on hold or the
feature is being programmed.
Context-sensitive soft keys
Context-sensitive soft keys are located below the display area. The
LCD label above the key changes, based on the active feature.
A triangle before a key label indicates that the key is active.
Fixed feature keys Use these keys to access non-programmable standard features.
Expand The Expand key is used to access external server applications, such
as Nortel Application Server.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.