System information

306 Nortel IP Phone 1120E

WARNING

Use your IP Phone 1120E with the approved Nortel

global power supply (model number N0089601).

The IP Phone 1120E supports both AC power and

Power over LAN options, including IEEE 802.3af

Power Classification 3. To use Power over Ethernet,

where power is delivered over the CAT5e cable, the

LAN must support Power over Ethernet, and an AC

adapter is not required. To use local AC power, the

optional AC adapter can be ordered separately. You

must use CAT5e (or later) cables if you want to use

Gigabit Ethernet.

Figure 51

IP Phone 1120E connections

4 Install the handset. Connect the end of the handset cable with

the short straight section into the handset. Connect the end of

the handset cable with the long straight section to the back of the

phone, using the RJ-9 handset jack. Form a small bend in the

cable, and then thread the handset cord through the channels in

the stand so that it exits behind the handset on the right side, in

the channel exit in the stand base. See Figure 52 "Cable routing

tracks" (page 307).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009