System information

Installation and configuration 305

Figure 49

Release the IP Phone 1120E from the stand

2 Remove the stand cover. Pull upward on the center catch and

remove the stand cover. The cable routing tracks are now

accessible. See .

Figure 50

Stand cover removed

3 Connect the AC power adapter (optional). Leave the AC adapter

unplugged from the power outlet, connect the adapter to the AC

adapter jack in the bottom of the phone. Form a small bend in

the cable, and then thread the adapter cord through the channels

in the stand.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009