System information

286 Nortel IP Phone 1110

Figure 44

Stand cover removed

3 Connect the AC power adapter (optional). Leave the AC adapter

unplugged from the power outlet, connect the adapter to the AC

adapter jack in the bottom of the phone. Form a small bend in

the cable, and then thread the adapter cord through the channels

in the stand.

WARNING

Use your IP Phone 1110 with the approved Nortel AC

adapter (model number N0089601).

The IP Phone 1110 supports both AC power and Power over

LAN options, including IEEE 802.3af Power Classification 2.

To use Power over Ethernet, where power is delivered over

the CAT5e cable, the LAN must support Power over Ethernet,

and an AC adapter is not required. To use local AC power, the

optional AC adapter can be ordered separately.

Figure 45 "IP Phone 1110 connections" (page 287) shows the IP

Phone 1110 connections.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009