System information

284 Nortel IP Phone 1110

CAUTION

Do not plug your IP Phone 1110 into an ISDN connection.

Severe damage can result.

Conﬁguring the IP Phone 1110

Use Procedure 77 “Configuring the IP Phone 1110” (page 284) to

configure the IP Phone 1110 for the first time.

Procedure 77

Conﬁguring the IP Phone 1110

Step Action

1 Configure a virtual loop on the Call Server using LD 97.

For more information about configuring a virtual loop, see

Signaling Server IP Line Applications Fundamentals (NN430

01-125) and Software Input Output Reference-Administration

(NN43001-611).

2 Configure the IP Phone 1110 on the Call Server using LD 11. At

the prompt, enter the following

REQ:new

TYPE: 1110

For more information about configuring the IP Phone 1110 using

LD 11, see Software Input Output Reference-Administration

(NN43001-611).

3 Configure the IP Phone 1110 in Element Manager. IP Phones

are configured using the Phones section in the Element

Manager navigation tree. For more information about configuring

the IP Phone 1110 using Element Manager, see Element

Manager System Reference - Administration (NN43001-632).

--End--

Connecting the components

Use Procedure 78 “Connecting the components” (page 285) to connect

the components for the IP Phone.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009