System information

156 Nortel IP Phone 1230
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.
Description
The IP Phone 1230 uses the customer IP data network to communicate
with the Communication Server 1000 (CS 1000). The IP Phone 1230
translates voice into data packets for transport using Internet Protocol.
Use a Dynamic Host Configuration Protocol (DHCP) server to provide
information that you can use for the IP Phone 1230 network and CS 1000
connections.
Figure 29 "IP Phone 1230" (page 156) shows the IP Phone 1230.
Figure 29
IP Phone 1230
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.