System information

Removing an IP Phone 1220 from service 153

3 Follow to install the IP Phone 1220. To configure the IP Phone,

see “Manual provisioning of IP Phone 1110 and 1200 Series”

(page 479).

4 Enter the same TN and node number as the IP Phone 1220 you

replaced. The Call Server associates the new IP Phone 1220

with the existing TN.

--End--

Removing an IP Phone 1220 from service

Procedure 38

Removing an IP Phone 1220 from service

Step Action

1 Disconnect the IP Phone 1220 from the network or turn off the

power.

The service to the PC is disconnected as well if the PC connects

to the IP Phone 1220.

If the IP Phone 1220 was automatically configured, the DHCP

lease expires and the IP address returns to the available pool.

2 In LD 11, enter the following:

REQ: OUT

TYPE: 1220

TN: LLL S CC UU

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009