System information

ManualsBrandsBoots ManualsGadgetsCS-1000

141

142

143

144

145

146

147

148

149

150

150 Nortel IP Phone 1220

c Set up the headset according to the instructions included with

the headset.

4 Connect the AC power adapter (optional).

The IP Phone 1220 supports both AC power and Power over

LAN options, including IEEE 802.3af Power Classification 2.

To use PoE, where power is delivered over the CAT5e cable,

the LAN must support PoE, and an AC adapter is not required.

To use local AC power, you can order the optional AC adapter

separately.

WARNING

Use your IP Phone 1220 with the approved Nortel

global power supply (model number N0089601).

The IP Phone 1220 supports both AC power and PoL

options, including IEEE 802.3af Power Classification

a Connect the Direct Current (DC) barrel connector to the

power jack on the back of the IP Phone.

b Thread the cable through the channel in the foot stand to

secure the cable.

c Plug the country-specific IEC cable into the Global Power

Supply, and then plug the Global Power Supply into the

nearest AC power outlet.

5 Install the Ethernet cable. Connect one end of the supplied

Ethernet cable to the back of your phone using the CAT5e

connector (LAN Ethernet port), and thread the network cable

through the channel in the footstand.

6 Connect the other end of the cable to your LAN Ethernet

connection. The LAN LED on the back of the IP Phone lights

when a LAN connection is established.

7 If you connect your PC through the phone, a second CAT5e

cable is required. Only one cable is included with the IP Phone

1220 package. Install the Ethernet cable connecting the PC to

the phone (optional). Connect one end of the PC Ethernet cable

to your phone using the CAT5e connector (PC Ethernet port),

and thread it through channel in the footstand. Connect the other

end to the LAN connector on the back of your PC.

The LAN Ethernet port supports Auto-Media Dependent Interface

Crossover (MDIX). Auto-MDIX is supported only when the

Ethernet port is configured for autonegotiation. The PC Port

does not support Auto-MDIX.

8 Wall mount the IP Phone 1220 (optional):

a Remove the footstand.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009