System information

138 Nortel IP Phone 1220
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.
Description
The IP Phone 1220 uses the customer IP data network to communicate
with the Communication Server 1000 (CS 1000). The IP Phone 1220
translates voice into data packets for transport using Internet Protocol.
Use a Dynamic Host Configuration Protocol (DHCP) server to provide
information that you can use for the IP Phone 1220 network and CS 1000
connections.
Figure 26 "IP Phone 1220" (page 138) shows the IP Phone 1220.
Figure 26
IP Phone 1220
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.