System information

134 Nortel IP Phone 1210
• obtaining the provisioning parameters
• connecting to the Call Server
The IP Phone is configured for automatic provisioning by default. For
more information about provisioning the IP Phone automatically, see
“Provisioning the IP Phones” (page 447).
You can manually configure all or some parameters. For information about
manually provisioning the IP Phone, see “Manual provisioning of IP Phone
1110 and 1200 Series” (page 479).
Redeploying an IP Phone 1210
You can redeploy an existing previously-configured IP Phone 1210 on
the same system. For example, you can assign the IP Phone 1210 to a
new user (new TN) or to an existing user who moved to a new subnet
by changing the TN of the IP Phone 1210. For further information, see
Converging the Data Network with VoIP Fundamentals (NN43001-260).
Procedure 31
Redeploying the TN of an existing IP Phone 1210
Step Action
1 Repower the IP Phone 1210.
During the reboot sequence of a previously configured IP
Phone, the IP Phone 1210 displays the existing node number
for approximately 5 seconds.
2 If you configure the node password to NULL, choose one of the
following:
a Disable the password.
b Set the password as nonNULL.
3 Press OK when the node number displays.
If Then
you configure the node password
to NULL
a password screen displays. Go
to Step 4.
the node password is disabled a TN screen displays. Go to Step
5.
4 Enter password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For more information, see Element Manager
System Reference - Administration (NN43001-632).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.